Steam vacuum hose C-series | Various sizes

Description

The steam vacuum hose for the C-series steam extraction vacuum cleaners is an essential component of the machine and is included as standard with the purchase of the steam cleaner. The hose provides flexibility and extended reach, allowing various surfaces to be cleaned efficiently and thoroughly. With the integrated steam and vacuum functions, combined with the Hydrojet/detergent function, you can get the most out of your steam extraction cleaner.

Ease of use

The controls are fully integrated into the hose handle, allowing for easy switching between functions. The steam function is activated via the push button under the handle and stops automatically when the button is released. For added safety, the handle is equipped with a sliding lock that can block or unlock the steam button.

Additionally, there are two buttons on the handle: the button with the fan icon switches the vacuum function on or off, and the button with the three droplets activates or deactivates the detergent or Hydrojet function, depending on which function is selected on the machine.

Available sizes

The C-Series steam vacuum hose is available in the following lengths:

• 4.5 meters (included as standard)
• 6 meters
• 9 meters

Maintenance

Proper maintenance is important to ensure a long service life for the steam vacuum hose. Always disconnect the hose from the machine after use to prevent the O-rings from drying out or getting stuck due to expansion or contraction. Hang the hose to dry.

The handle contains small O-rings that may be damaged if the lock is not fully opened when attaching or removing accessories. Keep the O-rings flexible by applying acid-free grease, such as petroleum jelly. Avoid using silicone spray, as it can evaporate when exposed to heat.

Regularly clean the hose by drawing warm water through it using the machine’s vacuum function to remove dirt residues and keep the hose in optimal condition.